Associated Products
(32)
• Barfeeds
  • • • -HYDRAFEED Multifeed ML1 Short Magazine Barfeed. Year 2001
  Boilers
  • • • -MT SAUTER Revolver DN5480 VDI40 Driven Tool Holder
    • • -OMAP TE40KF2046 Axial Driven Tool Holder
    • • -OMP HE681ZF20 Driven Tool Holder
  Chucks
  • • • -ELLIOTT Model 618 Hydraulic Surface with Magnetic Chuck
    • • -NEW KITAGAWA B-15 Power Chuck Complete with Adapter Plate
    • • -NEW KITAGAWA B-15 Power Chuck Complete with Adapter Plate
    • • -NEW KITAGAWA B-15 Power Chuck Complete with Adapter Plate.
  Compressors
  • • • -SULAIR BDS15 Screw Compressor
  Floor Plates
  • • • -CAST IRON Bedplate 3276mm x 914mm x 406mm. Weight 2.4 tons
    • • -CAST IRON T Slotted Bedplate 4876 x 1320 x 298mm. Weight 3 tons
    • • -CAST IRON T Slotted Plate
    • • -CAST IRON T Slotted Plate
    • • -CAST IRON T Slotted Plate
  Generators
  • • • -GLEASON 650 Hypoid Bevel Gear Generator with Equipment. Rougher/Finisher
  Jaws
  • • • -NEW KITAGAWA B-15 Power Chuck Complete 1 set of Soft Jaws
    • • -ROHM Msr Vice 175mm Jaw Width 0-400 Capacity Ref 161825
    • • -ROHM Msr Vice 175mm Jaw Width 0-400 Capacity Ref 161825
  Renishaw
  • • • -RENISHAW OMP 60 Machine Tool Probe
    • • -RENISHAW OMP 60 Machine Tool Probe
  Tooling
  • • • -CMZ TL20M CNC Lathe with Driven Tooling. Fanuc 21i-TB Control. Year 2006
    • • -DMG MORI CLX 750 V4 CNC Lathe with Driven Tooling. C & Y Axis. Siemens 840D Control. Year 2021
    • • -DOOSAN Puma TT1800SY CNC Lathe with Sub Spindle. Twin Turrets. Driven Tooling. Multifeed Barfeed. Fanuc 18i-TB Control. Year 2006
    • • -HNK Model VTC14/16 Vertical Turning Centre with C Axis, Live Spindle, Driven Tooling, Universal Milling Attachment. Fanuc 18i-TB Control. Year 2011.
    • • -MAZAK Quick Turn Nexus 250MS CNC Lathe with Driven Tooling & Hydrafeed Barfeed. Year 2004
    • • -MAZAK Quick Turn Smart 200M CNC Lathe with Live Tooling & Hydrafeed Multifeed Barfeed. Year 2015
    • • -MORGAN RUSHWORTH HST 95 Hydraulic Steelworker with Tooling. Year 2017
    • • -NEW VICTOR A20YCM CNC Lathe with Y axis and Driven Tooling. Fanuc 0i-TF Control
    • • -NEW VICTOR NP20CM CNC Lathe with Driven Tooling and Fanuc 0i-TF Control
    • • -NEW VICTOR NP20CM CNC Lathe with Driven Tooling, Large Spindle Bore and Fanuc 0i-TF Control
    • • -XYZ CT52 LTY CNC Lathe with Y Axis & Driven Tooling. Siemens Sinumerik 828D Control. Year 2015
  Vise
  • • • -HERBERT DEVLIEG 54-K-96 CNC Jigmill with Heidenhain TNC131 Control

Metal Forming
(13)
• Bending Rolls
  • • • -Horizontal Hydraulic Bending Press HPB 10. Year 2023
  Guillotines
  • • • -EDWARDS PEARSON Model V13/3000 Hydraulic Guillotine with Cybelec DNC60 NC Backgauge
    • • -EDWARDS PEARSON Model VE10/3000 Hydraulic Guillotine with Swissax 2000 NC Backgauge.Year 1993
    • • -MORGAN RUSHWORTH BHG3 3100 x 10 Hydraulic Guillotine with Cybelec CybTouch 8 NC Controller.Year 2013
    • • -PEARSON 3048mm x 6.5mm Hydraulic Guillotine
    • • -PEARSON 3050mm x 10mm Hydraulic Guillotine
    • • -WALTONS PG 1250/2 x 3mm Guillotine. Year 2008
  Laser Cutting
  • • • -OCULUS 2030 Flatbed Laser Cutting Machine. Year 2020
  Press Brakes
  • • • -MORGAN RUSHWORTH PBNC 3100-160 Hydraulic Downstroking Pressbrake. Year 2013
  Presses
  • • • -CURVASSI RTS 76 Hydraulic Pipe Bender with Formers. Year 2023
  Rolling Mills
  • • • -IRLE Model B100 HHG Hydraulic Ring/Section Rolling Machine. Year 1993
  Swaging
  • • • -Powered Swaging Machine with Tooling

Metal Cutting
(111)
• Boring
  • • • -WEBSTER & BENNETT DCM 120” Double Column Vertical Boring Machine with 2 x Newall DP700 Digital Readouts
    Horizontal Borers
    • • -UNION BFT80/2 Table Type Horizontal Borer with Outer Steady & DRO
    Vertical Borers
    • • -TOS Hulin SKIQ16 CNC Vertical Borer with Fanuc 16T Control. Year 1999
  Lathes (CNC and Manual)
  • Centre Lathes
    • • -BINNS & BERRY Trident L850 Straight Bed Centre Lathe x 12,000mm Between Centres. Rebuilt 2008
      • -COLCHESTER Student 1800 x 635mm Straight Bed Centre Lathe
      • -DEAN SMITH & GRACE Type 1910 x 40” (1016mm) Straight Bed Centre Lathe
      • -DEAN SMITH & GRACE Type 1910 x 80” (2032mm) Gap Bed Centre Lathe
      • -POREBA TCG125 x 12,000mm Heavy Duty Centre Lathe. Year 1987
      • -POREBA TCG200 x 5000mm Between Centres Heavy Duty Centre Lathe. Year 1987 (Can be supplied with a 6m bed extension – making it 11m between centres)
    CNC Lathes
    • • -BIGLIA Model B620 YS CNC Lathe with C Axes, Y Axis & Sub Spindle. Fanuc 0i-TF Control. Year 2021
      • -CITIZEN B12 Sliding Head CNC Lathe with IMECA Mini Boss 325CNC Barfeed. Year 1995
      • -CITIZEN B12 Sliding Head CNC Lathe with IMECA Mini Boss 325CNC Barfeed. Year 1997
      • -COLCHESTER Combi 6000 CNC Lathe with Fanuc 210i-TA Control.Year 2005
      • -COLCHESTER Tornado 220M CNC Lathe with Fanuc 21i-TB Control. Year 2003
      • -DMG MORI 450 Eco Turn CNC Lathe with Siemens Shopturn Control. C & Y Axis. Year 2016
      • -HAAS ST10 CNC Lathe with Haas Control. Year 2017
      • -HAAS ST30 CNC Lathe with Haas Control. Year 2013
      • -HARDINGE GS200/66 CNC Lathe with Siemens Sinumerik 810D Control. Year 2007
      • -HARRISON Alpha 1460XS CNC Lathe with Fanuc 0i-TD Control. Year 2013
      • -HARRISON Alpha 1460XS CNC Lathe with Fanuc 0i-TD Control. Year 2013
      • -HURCO TM8 CNC Lathe with WinMax Control. Year 2005
      • -HURCO TM8 CNC Lathe with WinMax Control. Year 2008
      • -HURCO TMX8i CNC Lathe with MAX Control. Year 2013
      • -HWACHEON Hi-Tec 200B CNC Lathe with Fanuc 0i-TD Control. Year 2013
      • -MAZAK Quick Turn 250MY CNC Lathe with Nexus Control. C & Y Axis. Year 2011
      • -MAZAK Quickturn 200MY CNC Lathe with Smooth Control. C & Y Axis. Year 2019
      • -NEW VICTOR NP20LSB CNC Lathe with Large Spindle Bore and Fanuc 0i-TF Control
      • -NEW VICTOR S26/110 CNC Lathe with Fanuc 0i-TF Control
      • -VICTOR Vturn 36/85 CNC Lathe with Fanuc 0i-T Control. Year 2012
      • -XYZ CT52 CNC Lathe with Siemens Sinumerik 828D Shopturn Control. Year 2015
      • -XYZ SLX 355 x 1000mm CNC Lathe with Prototrak Control. Year 2010
      • -XYZ SLX 555 x 3000mm Between Centres CNC Lathe with Prototrak SLX Control. Year 2014
      • -XYZ VL355 CNC Lathe with ProtoTrak VL Control. Year 2004
    Gap Bed Lathes
    • • -BSA FOREMOST BJ-1840D/B Gap Bed Lathe with Anilam DRO
      • -COLCHESTER 2000 CNC Flat Bed Lathe with Fanuc O-T Control. Year 1992
      • -SFM Model CET28120 CNC Flat Bed Lathe with Fanuc 0i-TD Control, Year 2014
    Heavy duty lathes
    • • -THOMAS 350 Super Technics Heavy Duty Chop Saw. Year 2005
    • • -HARRISON Alpha1350XS CNC Gap Bed Lathe with Fanuc 21i-TB with Manual Guide. Year 2006
    • • -Manual Hand Hydraulic Pipe Bender complete with Formers
    Turning Centres
    • • -OKUMA VTM 120-YB CNC 5 Axis Vertical Multitasking Turning Centre With Fanuc Series 18i-TB Control. Year 2008
  Sawing
  • Circular Saws
    • • -T Slotted Heavy Duty Cast Iron Circular Sub Table 2540mm dia. x 310mm thick
    Vertical Bandsaws
    • • -STARTRITE 24-V-10 Vertical Bandsaw with Blade Welder/Grinder
      • -STARTRITE Volant 24 Vertical Bandsaw
  Grinding
  • Cylindrical Grinders
    • • -CHURCHILL CW Plain Cylindrical Grinder. Swing 13” x 120” Between Centres
      • -JONES & SHIPMAN Model 1302 EIU Universal Cylindrical Grinder. Year 1984
      • -LANDIS LUND HMPB 14/125 Cylindrical Grinder with Angular Table. Complete with Coolant Tank. Filtration. Steadies
      • -MYFORD MG12 Cylindrical Grinder with Internal Grinding Attachment
      • -TOS Hostivar BHU 25 x 1000mm Universal Cylindrical Grinder with Internal Attachment
    • • -BRIERLEY Drill Point Grinding Machine
    • • -WALDRICH SEIGEN Model WSIIa850 Roll Grinding Machine. Swing 1100mm x 3500mm.
    Surface Grinders
    • • -JONES & SHIPMAN 1400P Hydraulic Surface Grinder. Year 1980
      • -JONES & SHIPMAN 540 Surface Grinder with Diaform Attachment
      • -JONES & SHIPMAN 540P Hydraulic Surface Grinder with Magnetic Chuck
    Universal Grinders
    • • -JONES & SHIPMAN 1302 EIT Universal Grinder with Internal Grinding Attachment
  Drilling
  • • • -ARBOGA RLM3508 Radial Arm Drilling Machine with Box Table
    • • -ASQUITH-ARCHDALE Model 2PT 12-54 4’6” Radial Arm Drilling Machine with Box Table. Year 1972
    • • -KITCHEN & WALKER Model E2 Radial Arm Drilling Machine
    Radial Drills
    • • -EPPinger Preci-Flex R78691A Radial Driven Toolholder. BMT65
      • -EPPinger Preci-Flex R78691A Radial Driven Toolholder. BMT65
      • -EPPinger Preci-Flex R78691A Radial Driven Toolholder. BMT65
      • -MAZAK Axial Driven Tool Holder. VDI 40
      • -MAZAK Radial Driven Tool Holder. VDI 40
      • -Radial Driven Tool Holder. VDI 40
      • -Radial Driven Tool Holder. VDI 40
  Gears Machining
  • Gear Shaping
    • • -MAXICUT 3A Gear Shaping Machine with Spur & Helical Guides, 6” Riser Block & Change Gears
      • -SYKES V400 Gear Shaper with Change Gears
  Lapping
  • • • -EPPinger Preci-Flex 7071.840 Axial Driven Tool Holder BMT85
    • • -EPPinger Preci-Flex R78691A Axial Driven Toolholder. BMT65
  Machining Centres
  • • • -CHESTER VL11 Vertical Machining Centre with Siemens Sinumerik 828D Control. Year 2021
    • • -DECKEL Maho 60T Verical Machining Centre with Heidenhain iTNC530 Control. Year 2003
    • • -DMU MORI DMU 75 monoBLOCK 5 Axis Vertical Machining Centre with Siemens 840D Control. Year 2021
    • • -HAAS TM3P Vertical Machining Centre with Haas Control. Year 2012
    • • -HAAS TM3P Vertical Machining Centre with Haas Control. Year 2015
    • • -HAAS VF-2DCH Vertical Machining Centre. Year 2007
    • • -HAAS VF2 Vertical Machining Centre with 4th Axis Attachment. Year 2015
    • • -HAAS VF2 Vertical Machining Centre with Haas Control. Year 2020
    • • -HAAS VF4 Vertical Machining Centre with 4th Axis Attachment. Year 2010
    • • -HAAS VF4 Vertical Machining Centre. Year 2006
    • • -HARDINGE BRIDGEPORT 1500 XP3 Vertical Machining Centre with Heidenhain iTNC 530 Control. Year 2004
    • • -HURCO VM2 Vertical Machining Centre with Nikken CNC202YA 4th Axis Attachment. Year 2006
    • • -HURCO VM20i Vertical Machining Centre with Max Control. Year 2017
    • • -HURCO VM3 Vertical Machining Centre with WinMAX Control. 4th Axis. Year 2005
    • • -HURCO VM30 CNC Vertical Machining Centre with MAX Control. Year 2012
    • • -HURCO VMX42 Vertical Machining Centre with Max Control. Year 2006
    • • -HURCO VMX42T Vertical Machining Centre with WinMAX Control. Year 2010
    • • -HURCO VMX84Ti Vertical Machining Centre. WinMAX Control. Year 2014
    • • -MATSUURA MX-330 10 Pallet 5 Axis Vertical Machining Centre with Matsuura G-Tech 31i Touch Screen Control. Installed 2022
    • • -MAZAK VARIAXIS i300 AWC Vertical Machining Centre with Smooth Control. New 2018. Installed 2019
    • • -MAZAK Variaxis i500 5 Axis Vertical Machining Centre. Mazatrol Matrix 2 Control. Year 2014
    • • -MAZAK Variaxis i500 5 Axis Vertical Machining Centre. Mazatrol Smooth X Control. Year 2016
    • • -MAZAK Variaxis J-500/5X Axis Vertical Machining Centre with Mazatrol Smooth X Control. Year 2019.
    • • -MAZAK VCN 530C Vertical Machining Centre with Smooth Control. 18k spindle. c/w Ultraspindle attachment. Year 2022
    • • -MAZAK VCN 530C Vertical Machining Centre with Smooth Control. 18k spindle. c/w Ultraspindle attachment. Year 2022
    • • -NEW VICTOR AX380 5 Axis Vertical Machining Centre
    • • -NEW Victor G105 Vertical Machining Centre with Fanuc 0i-MF Plus Control
    • • -NEW VICTOR P76 Vertical Machining Centre with Fanuc Control
  Milling
  • • • -AJAX Model AJT1 Turret Milling Machine
    • • -BRIDGEPORT Series I 2HP Turret Milling Machine with Slotting Attachment and Mitutoyo DRO
    • • -SEMCO LC-50RS Milling Machine with Heidenhain DRO
    • • -XYZ DPM5000 CNC Bedmill with ProtoTrak AGE3 Control. Year 2000
    Turret Mill
    • • -AJAX AJT4 Turret Mill with Acu-rite DRO. Year 2004
      • -BRIDGEPORT BR2J2 Series I 2HP Turret Mill with Heidenhain 3 Axis DRO. Year 1978
      • -BRIDGEPORT Series 1 2HP Variable Speed Turret Mill with DRO
      • -BRIDGEPORT Series 1 2HP Variable Speed Turret Mill with DRO
      • -BRIDGEPORT Series 1 Variable Speed Turret Mill with DRO
      • -CHESTER Turret Mill with Newall DRO. Year 2002
      • -VIKING VM4VS Turret Mill with DRO
  Slotting
  • • • -BRIDGEPORT Series 1 2HP Variable Speed Turret Mill with Slotting Attachment and DRO
    • • -CAST IRON T Slotted Cube
  Swarf Conveyors
  • • • -DOOSAN Lynx 300 CNC Lathe with Swarf Conveyor. Fanuc iSeries Control. Year 2014
  Tapping
  • • • -FUNDITOR Roll Stamping Machine

Box Tables
(2)
• • CAST IRON Boxtable 3810mm x 1092mm x 812mm. Weight 6.5 ton
  • CAST IRON Boxtable 3810mm x 1092mm x 812mm. Weight 6.5 ton

Spares & Accessories
(7)
• Digital Readout
  • • • -TOS W100A Table Type Horizontal Borer with Acu-rite 3 Axis Digital Readout. Year 1998
  Drill Press
  • • • -CHARMILLES Model HD8 EDM Drill. Year 2000
  Measuring Devices
  • Guage
    • • -SYLAC Z Cal 350 Digital Height Gauge
  Machine Vices
  • • • -CARVER & Co T550 5.12 Heavy Duty Machine Vice
    • • -CARVER & Co T550 5.12 Heavy Duty Machine Vice
    • • -CARVER & Co T550 5.12 Heavy Duty Machine Vice
    • • -CARVER & Co T550 5.12 Heavy Duty Machine Vice

Miscellaneous
(1)
• Other Machines
  • • • -ROLLWASCH RVS-5 Wheelabrator Vibro Machine. Year 2019

Welding Equipment
(1)
• Power Sources
  • • • -KEETONA 100” x 0.125” Hydroform Powered Folder. Year 1981

Turning Lathes
(1)
• • NEW VICTOR S26/60 LSB Horizontal Turning Lathe with Fanuc 0i-TF Plus Control